Attiny13 Software Uart Bascom

/* Software UART * * This feature provides a software implementation of a UART allowing you to * perform serial communications. It supports speeds of up to 250Kbps, can be * configured to use a single IO pin and has an option to be interrupt driven.

Thank you so much for the nice work! I tried to compile the program using the command (I changed the value of the MCU to “MCU=attiny13a” in the uart.h file as well): $sudo avr-gcc -Wall -g -Os -mmcu=attiny13a -DF_CPU=1200000 -I.

Next, connect the Serial cable to the breadboard. I use a 6-pin header on my board to make it easy to attach and detach the cable. With the cable attached, the ATtiny is now powered up and running.

The next step is to monitor the serial output. Open the Arduino IDE, select the COM port of your cable and open the Serial Monitor. Note that the Programmer option in the IDE needs to be set to AVRISP mkil for this to work. Universe sandbox serial key crack. If you are using a USBtinyISR to program your ATtiny85, just change it in the IDE when you have completed the programming step.